Perlesmith PSMFK1 - Level Adjustment; Post Installation Level; Tilt Adjustment

S TEP 6
Level adjustment
Place assembled part with TV onto arm and using Screwdriver, secure with
screws and
washers saved from
Step 1
.
S1
S2
Post Installation Level
If needed, the TV can be leveled +/- 3 degrees.
Loosen four nuts on the head of the bracket, Adjust the TV to the desired tilting angle, then fasten the nuts to hold the tilting angle of the TV.
S TEP 7
Tilt adjustment
4
[S]
S2
[S]
S1
DO NOT forget to use
the screw [s1 ] and the
washers [S2]
S1
S2
!
Loosen screw [S1]
S1
Level the TV
± 3°
Tighten 2 screws [S1]
S1
Adjust the tilting angle
Loosen the nuts on both side
4
4
3/8 in.
(10 mm)
Socket wrench
3/8 in.
(10 mm)
Socket wrench
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
se don't
hesitate to contact us.
support@perlegear.de
Tilt : +6.3°/-16.6°