Owner’s Manual Permobil K/C300 Maintenance and repairs
87
Maintenance and Repairs
To ensure that your wheelchair works well, you must inspect, maintain, and
obtain routine service on it regularly. Every wheelchair is subject to wear and
tear between the moving parts and also due to the strains and stresses of
typical use. Therefore, you must know how the wheelchair works, how to use it
correctly, and how to maintain it. Preventive maintenance will minimize the risk
of component failure. If you look after your wheelchair, it will work well and the
risk of faults is reduced.
Tool Kit
A tool kit comes with the wheelchair and contains the following that can be used
for performing maintenance and easier repairs.
Any inappropriate modifications to the wheelchair and its various systems may entail an increased
risk of accidents. Carefully follow the recommendations in the Handling section to prevent the risk
of accidents in connection with driving.
All modifications to and interventions in the vital systems of the wheelchair must be performed
by a qualified service technician. Always contact a qualified service technician in cases of doubt.
Certain repairs can require tools other than those that come with the wheelchair.
The power switch on the control panel must always be shut off when batteries are replaced or
when the electronics are being serviced.
Set of Allen Keys General maintenance/adjustment of seat
10-11/12-13 mm Spanner General maintenance/battery replacement
Seat Lift Crank (Powered seat lift only) Raising the seat
2 Screwdrivers General maintenance
TOOL AREA OF USE
m CAUTION
m CAUTION
m
WARNING
To Next Page
Loading...
