Petcube Bites 2 - Page 10

10
Reminder: It is likely that your Petcube
will need a firmware update right after
it is connected (fig 4.2.15). The firmware
update will be downloaded to your
camera within 24 hours. When the LED
light on the Petcube will start blinking
green rapidly (fig 4.2.17), do not
disconnect your device. The installation
only takes
5 minutes.
Fig. 4.2.7 Fig. 4.2.8
Fig. 4.2.9
Fig. 4.2.10 Fig. 4.2.11 Fig. 4.2.12