PART 8: MAINTENANCE AND SERVICE
PB1319 (CAT. NO. 5296 ) —105— 22-01691 (R02/02)
Main &
auxiliary
transmission
(Meritor)
Transfer Case Drain lubricant while warm. Flush each unit with clean flushing oil. X
Main &
auxiliary
transmission
(ZFMeritor)
Freedomline Transmis-
sion
Change the oil (see page 122
). 500,000 miles/
800,000 km
Air Intake Air intake piping, mount-
ing, and charge air cooler
Check the system for broken pipes, leaks, joint integrity, cleanli-
ness, and proper support (see page 155
).
X
Engine air intake tubing Disassemble, clean, check for cracks, leaks, and joint integrity. X
Cold starting aids Check for leaks and proper operation (see page 63
). X
Air cleaner Replace the element as indicated (see page 155
). When required by the
air restriction indicator
Clutch Clutch pedal shaft Check for excessive looseness and lubricate (NLGI #2 grease). X
Clutch pedal Check for proper free pedal (see page 140
). X
Clutch release linkage Check for excessive looseness and lubricate (NLGI #2 grease). X
Clutch release bearing Lubricate. X
SYSTEM COMPONENT MAINTENANCE TASK
Recommended
PM Interval
I ABCDE
To Next Page
Loading...
