PART 8: MAINTENANCE AND SERVICE
PB1319 (CAT. NO. 5296 ) —116— 22-01691 (R02/02)
Master Lubrication Index
Lubricant Symbol Key
BB: Ball Bearing grease
CB: Engine oil for mild to moderate requirements
CC/CD:Engine oil for severe requirements (MIL-L-2104B /
MIL-L-45199B w/ 1.85% max. sulfated ash content)
CD: Engine oil meeting API “Five engine test sequence”
CD50: SAE 50W synthetic transmission fluid
CE: Engine oil meeting severe duty service requirements for
direct-injection turbocharged engines.
CL: Multipurpose chassis grease
C4: Type C4 transmission fluid (torque fluid)
EP: Extreme Pressure Lubricant
GL: Straight mineral gear lubricant
HD: Hypoid Gear Oil, A.P.I. - GL-5, SAE 80W-90
HT: High Temperature grease (Timken Spec. 0-616)
MP: Multipurpose gear lubricant (MIL-L-2105B)
WB: Wheel Bearing grease (Timken Spec. 0-610)
NOTE: Keep the engine exhaust system and the vehicle’s cab/
sleeper ventilation system properly maintained. It is recommended
that the vehicle’s exhaust system and cab/sleeper be inspected
•
By a competent technician every 15,000 miles
•
Whenever a change is noticed in the sound of the
exhaust system
•
Whenever the exhaust system, underbody, cab or
sleeper is damaged
NOTE: The responsibility for meeting these specifications,
the quality of the product, and its performance in service
rests with the lubricant supplier.
To Next Page
Loading...
