PART 4: CONTROLS AND DISPLAYS
PB1319 (CAT. NO. 5296 ) —26— 22-01691 (R02/02)
engine fan will automatically turn on when the engine coolant reaches
a temperature of about 200
° F (93° C).
Power Mirror Switch
The power mirror control controls the adjustment of the right or left
outside mirrors, depending on the option selected.
WARNING! Do not work on the fan with the engine run-
ning. Anyone near the engine fan when it turns on
could be badly injured. If it is set at ON, it will turn on
any time the ignition key switch is turned to the ON
position. In AUTOMATIC, it could engage suddenly
without warning. Before turning on the ignition or
switching from AUTOMATIC to ON, be sure no one is
near the fan.
CAUTION: The fan or equipment near it could be dam-
aged if the fan turns on suddenly when you don’t expect
it. Keep all tools and equipment away from the fan.
NOTE: Do not operate the engine fan in the manual (ON) posi-
tion for extended periods of time. The fan hub was designed
for intermittent operation. Sustained operation will shorten the
fan hub’s service life as well as reduce fuel economy.
WARNING! Convex mirrors can distort images and make
objects appear smaller and farther away than they really are.
You could have an accident if you are too close to another
vehicle or other object. Keep plenty of space between your
vehicle and others when you turn or change lanes. Remem-
ber that other objects are closer than they may appear.
NOTE: The Power Mirror Switch does not control the adjust-
ment of the convex mirrors
03024
To Next Page
Loading...
