To Next PageTo Next PageWhat to do if there is no water after installation of Petlibro Dockstream PLWF005?
If there is no water coming out of your Petlibro Pet Care Product after installation, ensure the power supply is connected. Also, make sure the water tank and base are correctly installed, along with the water pump and water tank.
Critical safety advice for operating and handling the pet water fountain to prevent harm.
Important notes on preventing damage, ensuring proper use, and pet safety.
Step-by-step guide for dismantling and cleaning the water pump for optimal performance.
The Petlibro Dockstream Automatic Pet Water Fountain, model PLWF005, is designed to provide a continuous supply of fresh, filtered water for pets, encouraging them to drink more and stay hydrated. This device prioritizes safety, ease of use, and efficient maintenance, making it a reliable solution for pet owners.
The primary function of the Petlibro Dockstream Automatic Pet Water Fountain is to circulate and filter water, ensuring that pets have access to clean drinking water at all times. The fountain utilizes a multi-stage filtration system to remove impurities, odors, and particulate matter from the water. Water is drawn from the tank by a wireless water pump, passed through a foam filter and a main filter, and then dispensed through a spout into a water tray for pets to drink from. The continuous circulation helps to keep the water fresh and oxygenated, which can be more appealing to pets than stagnant water in a bowl. The design allows for flexible drinking preferences, as the spout can be optionally installed.
The fountain is designed for straightforward setup and operation. Before initial use, the filter must be fully soaked in a clean bowl for 5 minutes and then thoroughly rinsed with tap water. This crucial step ensures proper water flow and prevents spillage. It's important not to soak the filter in the water tank itself to avoid introducing surface dust. The foam filter is then inserted into the groove of the water pump, and the pump is positioned in the water tank, aligning its recessed part with the tank's protruding part for a firm installation. The silicone pipe is installed on the pump, and the water tank is filled with water.
Next, the water tray is installed, ensuring the water pipe passes through its designated hole and the snap lids are securely fastened to prevent loosening. The soaked main filter is then installed, using its small handle for easy future replacement, and ensuring the water pipe passes through the filter's hole. Finally, the filter lid is placed on top. Pet owners can choose to install the spout based on their pet's drinking preference. The device is powered by connecting the power adapter.
The fountain is intended for indoor use only and should never be operated without water. To prevent tripping hazards, the power cord should always be positioned out of the way of foot traffic. It's also important to avoid using the appliance in the bathroom. The device features a wireless pump and induction power supply, requiring correct installation of the power supply, water tank, and base for proper operation.
Regular maintenance is essential to ensure the longevity and effectiveness of the Petlibro Dockstream Automatic Pet Water Fountain. Both the main filter and the foam filter should be replaced at least once every 2 weeks. For households with multiple cats, more frequent filter replacement may be necessary if the filters become blocked. The entire pump and fountain should be cleaned at least once every 2 weeks.
Cleaning the pump involves removing the foam filter, pump cover, and impeller cover in sequence. The foam filter significantly impacts water yield, so frequent cleaning and timely replacement are recommended. The impeller can be removed using a brush hook for thorough cleaning. A brush is provided and can also be used to clean the spout, which is recommended every 2 weeks.
When black residues or dirt appear in the water tank or on the filter element, it indicates a need for cleaning. Ensuring clean water sources are replaced regularly and soaking and washing the filter element in advance can help prevent this. If water output speed slows down, it could be due to dirt in the pump, requiring cleaning as per the instructions. For the first use or after long-term storage, a slow water output speed is normal as the water pump needs to discharge air.
The device is designed for easy disassembly of components for cleaning, but users are advised not to disassemble the pet fountain beyond the instructions in the manual. Only manufacturer-recommended attachments should be used. It is crucial to disconnect the power supply for safety when the appliance is not in use, before maintenance, or before cleaning. The power adapter and wire plug must not be flooded during cleaning. Importantly, no parts of the machine should be placed in a dishwasher to avoid deformation.
To prevent pets from chewing on or swallowing parts, especially the power cord, purchasing a cord conduit (hard-plastic protector) is recommended. If an extension cord is necessary, one with a proper rating should be used. The fountain should not be installed or stored in locations exposed to weather or temperatures below 0°C / 40°F.
General| Product Name | Petlibro Dockstream PLWF005 |
|---|---|
| Category | Pet Care Product |
| Type | Automatic Pet Water Fountain |
| Material | BPA-free Plastic |
| Power Supply | 5V/1A (USB powered) |
| Filtration System | activated carbon, ion exchange resin |
| LED Indicator | Yes |
