6. Insatll the filter lid. Whether to install the spout
depends on your pet's drinking preference.
CARE INSTRUCTIONS
2. Remove the impeller by the brush hook.
1. Remove the foam filter, pump cover and impeller cover
in sequence.
Note:
The foam filter affects the water yield very much, so
please clean it frequently and replace it in time when
cleaning the pump.
How to clean the pump
8. Install the water tank with the tank base by aligning
the protruding hole of the water tank with the tank base.
7. Connect the power adapter.
1. Replace the filter and the foam filter at least once every 2
weeks.
2. Clean the pump and fountain at lease once every 2
weeks.
09 10
Fitted
with Spout
Not Fitted
with Spout
1
2
The Bottom
Of The Tank
Tank Base
To Next Page
Loading...
