A. TOP
B. MIDDLE
C. BOTTOM
D. VENT
E. SCREWS (3/4” LONG #8)
12 TOTAL
EE
COMPONENTS
TM
HUSKY DOG HOUSE
OWNER’S MANUAL
1. ATTACH TOP TO MIDDLE
PLACE TOP (A) UPSIDE-DOWN ON GROUND AND ALIGN
MIDDLE (B) WITH THE E-Z ALIGN TABS.
ONCE ALIGNED, USE 5-SCREWS (E) AND ATTACH TOP &
MIDDLE PIECES TOGETHER.
2. ATTACH TOP/MIDDLE TO BOTTOM
TAKE THE NOW CONNECTED TOP/MIDDLE, AND PLACE ON
THE BOTTOM (C) OF THE DOG HOUSE. THE E-Z ALIGN TABS
WILL HELP PROPERLY ALIGN THE PIECES.
ONCE ALIGNED, USE 5-SCREWS (E) TO ATTACH THE
TOP/MIDDLE TO THE BOTTOM (C) OF THE DOG HOUSE.
3. ATTACH VENT
SLIDE IN THE VENT (D) ON THE TOP OF THE DOG HOUSE.
ATTACH IT IN PLACE WITH 2-SCREWS (E).
NOTE: DO NOT DRAG DOG HOUSE AROUND BY THE VENT.
IF MOVING THE DOG HOUSE AROUND THE YARD, TEAM LIFT
WITH TWO PEOPLE.
ASSEMBLY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE ASSEMBLY. SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE.
E
E
E
E
E
E
E
E
E
E
To Next Page
Need help?
General
