Petsafe Guardian GPS - About the collar; Charging the collar battery

Antenna
Battery slot
Status light
Contact points
About the collar:
1. Place the battery in one of the slots in the battery charger. Turn the battery so the arrow on the
top of the battery points to the unlock icon.
2. Press the battery down and turn it clockwise to the locked position.
3. Plug the battery charger into a standard electrical outlet.
4. After charging, release the battery from the charger by pressing it down and turning it
counterclockwise to the unlocked position.
The slot’s LED will glow red when the battery is charging and green when charging is complete
(within 4 hours). Each charge can last 48 to 72 hours, depending on frequency of use.
If desired, you can purchase an additional battery on petsafe.com so you can have one battery
charging while the other is inuse.
Charging the collar battery
To charge the collar battery:
10