EasyManua.ls Logo

Petsafe In-Ground Cat Fence - User Manual

Petsafe In-Ground Cat Fence
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PetSafe
®
In-Ground Cat Fence
Operating and Training Guide
Manuel d’utilisation et de dressage
Handleiding en Africhtingsgids
Manual de adiestramiento y funcionamiento
Betriebsanleitung und Trainingsanleitung
Guida all’uso e all’addestramento
Please read this entire guide before beginning
Veuillez lire ce manuel en entier avant de commencer
Gelieve deze gids volledig door te lezey voordat u begint
Por favor, este manual lea completo antes de empazar
Bitte lesen Sie die gesamte Betriebsanleitung vor dem Trainingsbeginn
Si prega di leggere attentamente la guida al uso prima di utilizzare il collare

Table of Contents

Other manuals for Petsafe In-Ground Cat Fence

Questions and Answers

  • D
    Debra McbrideJul 26, 2025
    What to do if Petsafe In-Ground Cat Fence Pet Care Product collar beeps, but cat not responding?
    • K
      Kevin DanielsJul 26, 2025
      If your PetSafe Pet Care Product receiver collar is beeping but your cat isn't responding to the static correction, ensure the static correction level is at 2 or above. Test the receiver collar with the test light. If the test light flashes, check the fit of the receiver collar. Consider trimming your cat’s fur where the contact points touch the neck or switch to longer contact points. You may also need to increase the static correction level and repeat training steps to reinforce the training.
  • S
    Stephanie BlairJul 31, 2025
    Why does Petsafe Pet Care Product collar activate inside the house?
    • W
      Wendy LoganJul 31, 2025
      If the PetSafe Pet Care Product receiver collar activates inside the house, turn the boundary width control knob counterclockwise to decrease the activation distance from the boundary wire. Also, ensure the boundary wire isn't too close to the house, as the signal can transmit through walls. Finally, verify that the boundary wires are twisted from the boundary to the fence transmitter.
  • M
    mark24Aug 5, 2025
    What to do if Petsafe In-Ground Cat Fence loop indicator light is off?
    • B
      bsimmonsAug 5, 2025
      If the power light is on, the loop indicator light is off, and the fence transmitter loop alarm is sounding for your PetSafe Pet Care Product, ensure both ends of the boundary wire are securely plugged into the boundary wire terminals with 1.3 cm (1/2 in) of exposed copper wire. Perform the 'Short Loop Test' to determine if the fence transmitter needs replacement or if the boundary wire is broken. If the transmitter functions correctly, there's likely a break in your boundary wire.
  • C
    cynthiaperkinsAug 10, 2025
    Why does my Petsafe Pet Care Product have an inconsistent signal?
    • K
      Kimberly BeckAug 10, 2025
      If you're experiencing an inconsistent signal with your PetSafe Pet Care Product, ensure the fence transmitter is at least 1 m (3 ft) away from large metal objects or appliances. Make sure all boundary wire turns are gradual. Also, verify that the boundary wire isn't running parallel to and within 1.5 m (5 ft) of electrical wires, neighboring containment systems, telephone wires, television or antenna cables, or satellite dishes.
  • D
    dudleyandreaAug 15, 2025
    How to fix Petsafe In-Ground Cat Fence collar when it's not beeping?
    • R
      Richard RojasAug 15, 2025
      If the PetSafe Pet Care Product receiver collar isn't beeping or correcting, check the batteries to ensure they are installed properly. Also, check that both lights are lit on the fence transmitter. If not, perform the 'Short Loop Test'.
  • J
    Joseph DonaldsonAug 20, 2025
    Why are Petsafe In-Ground Cat Fence Pet Care Product power and loop lights off?
    • D
      David ReyesAug 20, 2025
      If the power and loop indicator lights are off on your PetSafe Pet Care Product, first check that the power adapter is properly plugged into the fence transmitter. Try plugging it into another outlet. If the lights still don't come on, the fence transmitter or power adapter may need replacement.

Summary

Components

Other Items You May Need

Lists additional items required for setup and installation of the PetSafe In-Ground Cat Fence system.

How the System Works

Key Definitions

Operating Guide

Locate the Fence Transmitter

Details the proper placement and installation requirements for the fence transmitter unit.

Lay Out the System

Guides on planning and laying out the boundary wire path around the pet area.

Sample Layouts

Offers visual examples of common boundary wire configurations for different property types.

Install the Boundary Wire

Fit the Receiver Collar

Training Guide

Be Patient With Your Cat

Emphasizes patience and consistency for successful cat training with the fence system.

Preparation

Outlines necessary steps and considerations before starting the cat's training program.

Day 1 - Boundary Flag Response

Teaches the cat to associate boundary flags with the concept of a boundary.

Days 2 thru 4 - Boundary Awareness - Warning Zone

Trains the cat to recognize and respond to the warning beep zone.

Days 5 thru 7 - Boundary Awareness - Static Correction Zone

Trains the cat to react to and move away from the static correction.

Troubleshooting

Short Loop Test

A diagnostic test to identify system component malfunctions or wire breaks.

To Locate a Break in the Boundary Wire

Steps to find and repair breaks in the boundary wire for system continuity.

Caution

Petsafe In-Ground Cat Fence Specifications

General IconGeneral
Collar TypeReceiver Collar
Animal TypeCat
Wire Gauge20 Gauge
Adjustable Correction LevelsYes
Product TypeIn-Ground Fence
Coverage AreaUp to 1/3 acre
Training FlagsIncluded
Waterproof RatingWaterproof Collar
Collar BatteryRFA-67
WaterproofYes
Receiver Collar FitAdjustable

Related product manuals