EasyManua.ls Logo

Petsafe IF-275 - User Manual

Petsafe IF-275
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
wireless
pet containment system
receiver collar / collier-récepteur / collar receptor
operating guide / guide d’emploi / guía para el uso
IF-275
PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING.
VEUILLEZ LIRE L’INTÉGRALITÉ DE CE MANUEL AVANT TOUTE UTILISATION.
SÍRVASE LEER COMPLETAMENTE ESTA GUÍA ANTES DE COMENZAR A USAR EL PRODUCTO.

Questions and Answers

  • R
    rmartinezAug 4, 2025
    How to fix a PetSafe Pet Care Product collar that is not beeping?
    • P
      Pamela HortonAug 5, 2025
      If the PetSafe Pet Care Product's receiver collar isn't beeping or administering a static correction, first check that the Transmitter is plugged into a working 120-volt outlet, turned on, the Power Light is on, and the Transmitter controls are set at your desired settings. Check the receiver battery to make sure it is installed properly. When replacing the battery, do so while standing within 5-10 feet of the Transmitter. You may also need to re-synchronize the system.
  • D
    dennis86Aug 20, 2025
    What to do if Petsafe IF-275 Pet Care Product's collar is beeping but pet isn't responding?
    • J
      James WarrenAug 20, 2025
      If your PetSafe Pet Care Product's receiver collar is beeping but your pet isn't responding to the static correction, first ensure the Static Correction Level is set to 2 or above. Test the Receiver Collar with the Test Light. If the Test Light flashes, check the fit of the Receiver Collar. Trim your pet’s fur where the Contact Points touch the neck or switch to the longer Contact Points. You may also need to increase the Static Correction Level or repeat training steps to reinforce training.

Summary

Important Safety Information

Safety Alert Symbol

Symbol used to alert to potential personal injury hazards. Obey messages to avoid injury or death.

WARNING

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not avoided, could result in harm to your pet.

How the System Works

System Operation Overview

Explains how the system works by transmitting a radio signal and using a receiver collar.

Operating Guide

Prepare the Receiver Collar

Instructions on preparing the receiver collar, including fitting contact points for pets.

Insert and Remove Receiver Collar Battery

Steps for inserting and removing the PetSafe RFA-67 battery from the receiver collar.

Set the Static Correction Level

Guide to setting the static correction level from 1 to 4 using the correction level button.

Battery Contact Verification

Procedure to verify battery contact and ensure the LED light illuminates correctly.

Re-Thread the Collar

Guide on how to correctly thread the collar strap through the buckle and ridges.

Fit the Receiver Collar

Proper Collar Fit and Placement

Steps to ensure the receiver collar fits properly and is placed correctly on the pet's neck.

Collar Adjustment and Trimming

Instructions for checking collar tightness, rechecking fit, and trimming excess collar length.

Taking Your Pet Out of the Pet Area

Methods for Leaving the Pet Area

Options for taking a trained pet out of the defined pet area with or without the collar.

Troubleshooting

Receiver Collar Not Beeping;Correcting

Steps to resolve issues where the receiver collar is not beeping or administering static correction.

Receiver Collar Beeping Everywhere

Solutions for when the receiver collar beeps constantly, indicating it's outside the boundary.

Pet Not Responding to Correction

Steps to take if the pet does not respond to static correction from the receiver collar.

Pet Fearful of Static Correction

Advice on handling pets that become fearful of static correction, suggesting adjustments and training.

Test Light Instructions

Using the Test Light Tool

How to use the test light tool to verify the receiver collar is functioning correctly.

Re-synchronize the System

System Re-synchronization Procedure

Step-by-step guide to re-synchronize the pet containment system.

Terms of Use and Limitation of Liability

Terms of Use

Conditions and notices regarding the product's usage and acceptance of terms.

Proper Use Guidelines

Information on the intended use of the product and consulting professionals for pet suitability.

Prohibited Use

Details on unlawful or prohibited uses of the pet training device, ensuring compliance with laws.

Compliance USA;Canada

FCC and IC Regulations

Compliance statements for USA (FCC) and Canada (IC) regarding radio frequency interference.

Customer Care International

Contact Information and Warranty Details

Provides international customer care contact numbers and warranty information sources.

Warranty

One Year Limited Warranty

Details of the one-year non-transferrable limited warranty for the product in Australia/New Zealand.

Claims Procedure

How to File a Warranty Claim

Instructions on how to submit a warranty claim, including required proof of purchase and return process.

Petsafe IF-275 Specifications

General IconGeneral
TypeIn-Ground Fence
Coverage AreaUp to 1/3 acre
Wire Gauge20-gauge
Collar Battery Type6-Volt
Number of Correction Levels4
WaterproofYes, collar is waterproof
Battery Type6-Volt
Correction Levels4 adjustable levels plus tone-only mode
Tone Only ModeYes

Related product manuals