6 1-800-732-2677
Fit the Bark Control Collar
Important: The proper fit and placement of your Bark Control Collar
is important for effective operation. The Contact Points must have
direct contact with your dog’s skin on the underside of his neck.
To assure a proper fi t, please follow these steps:
1. Make sure that the battery is in the “OFF”
position.
2. Have your dog standing comfortably.
3. Center the Contact Points underneath your
dog’s neck, touching the skin.
YES
NO
Note: It is sometimes necessary to trim
the hair around the Contact Points to
make sure that contact is consistent.
4.
The PetSafe QuickFit™ Collar is designed so you can
quickly attach and remove the Bark Control Collar
from your dog while maintaining the desired fi t.
a. With the Snap Buckle fastened, thread the collar
through the Metal Buckle and Retaining Tabs.
b. Slide the excess collar through the “C” Loop on
top of the Snap Buckle. This will hold the collar
in place.
c. Once the collar fi t is determined, simply use the
Snap Buckle to remove and replace the collar.
To Next Page
Loading...
