10 Customer Care Center 1-800-732-2677
4. To attach the Pee Pad Clip to the
pad, press the Clamping Plate lever
(4E) to open and slide onto the
designated area (4F).
NOTE: The pad must be fully opened
with no folds. If the Pee Pad Clip is not
attached to the designated area it will
not operate.
Pee Pad Clip LED – Function and Response
Pee Pad Clip Function LED Response
Battery added and on Green LED flashes once
Low battery
Red LED flashes once every 10 seconds
Moisture detected from Pee Pad Orange LED flashes once
4E 4F