Winding the Bbobbin
- corresponding
. (1/2)
- Snap thread into thread guide. (3)
- Wind thread counterclockwise around
bobbin winder tension discs. (4)
- Thread bobbin as illustrated and place on
spindle. (5)
- Push bobbin spindle to right. (6)
- Hold thread end. (7)
- Step on foot control pedal. (8)
- Cut thread. (9)
- Push bobbin spindle to left (10) and
remove.
When the bobbin winder spindle is in
"bobbin winding" position, the machine will
not sew and the hand wheel will not turn.
To start sewing, push the bobbin winder
spindle to the left (sewing position).
Please Note:
Place thread and spool
holder on to spool pin
1
2
3
4
5
6
7
8
9
10
Threading the Machine
32
GB/IE
To Next Page
Loading...
Need help?
General
