EasyManua.ls Logo

Pfaff 1163

Pfaff 1163
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mounting and commissioning the machine
8 - 9
By pressing the corresponding +/- key, call up parameter "798" and select service level
"C", see Chapter 13.09.01 Selecting the user level
By pressing the corresponding +/- key select parameter "700".
TE
798 11
C
Sew one stitch by operating the pedal.
Turn the balance wheel in the direction of sewing until the tip of the needle is level with
the top edge of the needle plate.
Conclude the adjustment of the sewing motor by pressing the TE/Speed key.
The adjustment described above only applies to machines with Eco-Drive!
When using another type of motor, please observe the motor instruction
manual of the manufacturer.
TE
101 on
B
By pressing the corresponding +/- key, call up parameter "800" (rotation direction of the
motor).
By pressing the corresponding +/- key enter the value "1".
TE
800 1
C
TE
700
B

Table of Contents

Other manuals for Pfaff 1163

Related product manuals