Care and maintenance
11 - 2
11.02 Checking the oil level / filling in oil
The oil level must always be between the markings "High" and "Low".
● Switch off the machine.
● Tilt the machine back and check the oil level.
● If necessary fill in oil up to the marking "High".
When commissioning the machine or after a long period of non-operation,
operate the machine with max. 2000 spm for the first 10 minutes! Danger of
damage to the machine!
Set the machine upright with both hands!
Danger of crushing between machine head and table top.
Only use oil with a mean viscosity of 10.0 mm
2
/s at 40°C and a density
of 0.847 g/cm
3
at 15°.
We recommend PFAFF sewing machine oil, part no. 280-1-120 105.
Fig. 11 - 02
76-008
HIGH
LOW
To Next Page
Loading...
Need help?
General
