8.02 Commissioning the machine
● Check the machine, especially the electrical leads, for any damage.
● Clean the machine thoroughly (see
chapter 10 Care and maintenance).
● Have specialists ensure that the machine’s motor can be operated with the available
electricity supply and that it is connected properly. If not, the machine must not be
operated.
8.03 Switching the machine on/off
● Switch the machine on (see Chapter 7.01 On/Off switch).
8.01.07 Connecting the plug connections and earth cable
Fig. 8 - 08
● Connect all plugs coming from the machine as labelled in the control box.
● Attach earth cables 1 and 2 on the rear side of the control box as shown in Fig. 8-09.
Fig. 8 - 09
2
1
To Next Page
Loading...
Need help?
General
