Need help?Do you have a question about the Pfaff 1243 and is the answer not in the manual?
General| Brand | Pfaff |
|---|---|
| Model | 1243 |
| Category | Sewing Machine |
| Language | English |
Compliance with European regulations and local legislation for safe operation.
Guidelines for safe machine operation, maintenance, and repair.
Explanation of hazard, warning, and caution symbols used in the manual.
Key responsibilities and requirements for machine owners regarding safety.
Defines roles and safety obligations for operating and technical staff.
Specific safety rules and obligations for machine operators.
Specific safety rules and obligations for technical maintenance staff.
Details specific danger warnings with corresponding illustrations.
Defines the intended application of PFAFF 1243 and 1244 sewing machines.
Detailed technical data including stitch type, needle system, speed, and dimensions.
Detailed technical data including stitch type, needle system, speed, and dimensions.
Instructions for proper machine disposal according to environmental regulations.
Information on how machines are completely packed and delivered.
Recommendations for safe transport of machines within customer premises.
Guidelines for disposing of paper, cardboard, and VCI fleece packaging.
Advice on storing the machine to prevent damage and corrosion.
Explains symbols used to emphasize important information or activities.
Details the location and function of the machine's main power switch.
Explains the function of buttons on the machine head for backtacking.
Describes the operation and different positions of the treadle control.
Details the function of the hand lever for raising the roller presser.
How to adjust stitch length and sew in reverse using the lever.
How to adjust stitch length for forward and reverse stitches.
Explains the function of the knee lever to raise the roller presser.
Refers to the drive manual for descriptions of the control panel.
Essential requirements for setting up the machine, including site conditions.
Step-by-step instructions for adjusting the machine table height.
Procedure for correctly inserting the sewing machine head into the stand.
Instructions for assembling the motor bracket, motor, and guard.
How to properly tension the V-belt for optimal operation.
Steps for mounting the lower V-belt pulley and guard.
Instructions for assembling the upper V-belt guard.
Procedure for mounting the synchroniser component.
Instructions for assembling the safety anti-tipping device.
Guide for connecting plug-in connections and ground cables safely.
Steps for assembling the thread reel stand.
Procedures and checks required before the first machine start-up.
Instructions on how to safely switch the machine on and off.
Refers to drive manual for setting machine drive home position.
Step-by-step guide for inserting the needle correctly for both models.
Instructions for winding bobbins and adjusting thread tension.
Procedures for removing and inserting the bobbin case.
How to insert the bobbin case and adjust its thread tension.
Guide for threading the needle and adjusting tension for PFAFF 1243.
Guide for threading the needle and adjusting tension for PFAFF 1244.
Refers to manual for setting the bobbin stitch counter.
Details recommended intervals for cleaning, oiling, and checks.
Comprehensive instructions for cleaning the sewing machine.
Step-by-step guide for oiling various parts of the machine.
Specific procedures for oiling the hook mechanism.
Instructions for oiling the sliding and bearing points on the front parts.
How to check and set the correct air pressure for the machine.
Procedure for cleaning the air filter in the maintenance unit.
Refers to a separate list for parameter settings.
Technical drawing and dimensions for the PFAFF 1243 table plate cutout.
Technical drawing and dimensions for the PFAFF 1246 table plate cutout.
Diagrams and instructions for assembling the table top.
Lists the most important wearing parts for the sewing machines.
Illustrations and part numbers for wearing parts.
To Next Page
