EasyManua.ls Logo

Pfaff 1244

Pfaff 1244
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1243
1244
This instruction manual applies to machines
from the following serial numbers onwards:
7 262 020 and software version 0435/002.
INSTRUCTION MANUAL
296-12-19 312/002
Operating instructions Engl. 05.15

Table of Contents

Other manuals for Pfaff 1244

Question and Answer IconNeed help?

Do you have a question about the Pfaff 1244 and is the answer not in the manual?

Pfaff 1244 Specifications

General IconGeneral
BrandPfaff
Model1244
CategorySewing Machine
LanguageEnglish

Summary

Safety

1.01 Directives

Adherence to European regulations and local legal requirements for machine operation.

1.02 General Safety Instructions

Essential safety rules for machine operation, maintenance, and personnel.

1.03 Safety Symbols

Explanation of hazard and caution symbols used throughout the manual.

1.04 Owner-Operator Safety Points

Owner-operator's responsibilities for safe machine use and manual availability.

1.05 Personnel Safety Roles

Roles and safety obligations for operating and technical personnel.

1.06 Danger Warnings

Specific warnings about operating without guards and potential hazards.

Proper Use

Technical Data

3.01 PFAFF 1243 Technical Specifications

Technical specifications for the PFAFF 1243 sewing machine.

3.02 PFAFF 1244 Technical Specifications

Technical specifications for the PFAFF 1244 sewing machine.

Disposal of the Machine

Transport, Packaging and Storage

5.01 Transport to Customer Premises

Information on how machines are packed for delivery to customers.

5.02 Internal Transport and Liability

Manufacturer's liability disclaimer for internal transport and position during transport.

5.03 Packaging Material Disposal

Information about packaging materials and customer responsibility for disposal.

5.04 Machine Storage Guidelines

Guidelines for storing the machine to prevent damage and corrosion.

Work Symbols

Operating Controls

7.01 Main Switch Operation

Description of the main switch for turning the machine on and off.

7.02 Machine Head Buttons

Function of buttons on the machine head for reverse sewing.

7.03 Treadle Operation

Operation of the treadle for sewing and thread trimming.

7.04 Roller Presser Hand Lever

How to use the hand lever to lift the roller presser.

7.05 Stitch Length & Reverse Lever

Adjusting stitch length and sewing in reverse using a lever.

7.06 Stitch Length Regulation Lever

Adjusting stitch length for forward and reverse stitches.

7.07 Knee Lever Operation

Operation of the knee lever to raise the roller presser.

7.08 Control Panel Reference

Reference to the drive manual for control panel descriptions.

Set-up and Initial Commissioning

8.01 Set-up

Requirements for the erection site and initial setup procedures.

8.02 Electrical Connections and Grounding

Guide to connecting electrical plugs, ground cables, and bushings.

8.03 Reel Stand Assembly

Instructions for assembling and mounting the thread reel stand.

8.04 Initial Start-up and Operation

Procedures for initial machine startup, switching on/off, and drive positioning.

Set-up

9.01 Needle Insertion

Procedure for inserting the correct needle into the sewing machine.

9.02 Bobbin Winding and Thread Tension

Steps for winding the bobbin and adjusting thread tension.

9.03 Bobbin Case Handling

Guide to safely remove and insert the bobbin case.

9.04 Bobbin Case Insertion and Tension

Inserting the bobbin and adjusting its thread tension.

9.05 PFAFF 1243 Needle Threading

Procedure for threading the needle and adjusting needle thread tension for PFAFF 1243.

9.07 PFAFF 1244 Needle Threading

Procedure for threading the needle and adjusting needle thread tension for PFAFF 1244.

9.08 Bobbin Stitch Counter Setting

Reference to a separate manual for bobbin stitch counter settings.

Maintenance and Care

10.01 Maintenance Intervals

Recommended schedule for cleaning, oiling, and checking the machine.

10.02 Machine Cleaning

Detailed steps for cleaning the sewing machine, including the hook area.

10.03 General Oiling

Instructions for oiling various points on the machine for proper function.

10.04 Hook Oiling

Specific instructions for oiling the hook mechanism.

10.05 Front Parts Oiling

Procedure for oiling the front components of the sewing machine.

10.06 Air Pressure Check and Setting

How to check and adjust the required air pressure for the machine.

10.07 Air Filter Cleaning

Steps for cleaning the air filter within the maintenance unit.

10.08 Parameter Settings Note

Note that parameter settings are described in a separate list and require qualified personnel.

Table Top

11.01 PFAFF 1243 Table Plate Cutout

Technical drawing and dimensions for the table plate cutout for PFAFF 1243.

11.02 PFAFF 1244 Table Plate Cutout

Technical drawing and dimensions for the table plate cutout for PFAFF 1244.

11.03 Table Top Assembly

Diagram showing the assembly of components onto the sewing machine table top.

Wearing Parts

Wearing Parts Overview

List of essential wearing parts for PFAFF 1243 and 1244 machines.

Related product manuals