Pfaff 1244

Set-up
31
9.07 Threading the needle thread / adjusting the needle thread tension
(with the PFAFF 1244)
Switch off the machine!
Risk of injury due to accidental machine start-up!
 Thread the needle thread as shown in Fig. 9 - 07. Please ensure that the right needle is
threaded from the left and the left needle is threaded from the right.
 Adjust the needle thread tension by turning the knurled thumb screw 1 (right needle or 2
left needles).
Fig. 9 - 07
+
-
+
-
1
2
9
.08 Setting the bobbin stitch counter
For the description please refer to the separate instruction manual for the drive,
see Chapter 5.3.1Setting the bobbin stitch counter.