Input
40
11 .03 Parameter input
After the machine has been switched on, it is in the input mode..
No VAL
001 2700
With the corresponding +/- key select the desired parameter, e.g. 003 lock seam
patterns.
●
No VAL
003 1: ON
With the corresponding +/- key select the desired seam pattern.●
No VAL
003 3: OFF
With the corresponding +/- key lock the desired seam pattern.
Conclude the input by pressing the TE key. (The machine changes to the sewing mode).
There is a list explaining all the parameters in Chapter 11.06 List of parameters.
●
●
To Next Page
Loading...
