Pfaff 3704-2/03 - Zigzag Drive Oiling

Justierung
51
Fig. 1 - 46
● Adjust cylinder bracket 1 (screws 2) in accordance with requirement 1.
● Adjust throttle 3 in accordance with requirement 2.
1.05.45 Thread puller (only on the PFAFF 3704-2/02)
Requirement
The thread puller should
1. draw so much thread that a secure seam start is guaranteed at all times and
2. remain in its end front position until the thread trimming operation is fi nished.
2
1
3
2