Pfaff 3704-2/03 - Adjusting the Thread Trimmer -900;24; Axial Position of the Control Cam

Justierung
52
Fig. 1 - 47
1
2
3
4
4
0,3 mm
1.06 Adjusting the thread trimmer -900/24
1
.06.01 Axial position of the control cam
● Shift control cam 1 (screw 2) and adjustment ring 3 (screw 4) in accordance with the
requirements.
Requirement
1. Roller 5 should be at a distance of 0.3 mm from the control cam 1.
2. Adjustment ring 3 should be touching the control cam 1.