Pfaff 3704-2/03 - Centering the Needle in the Needle Hole (in Sewing Direction)

Justierung
8
Fig. 1 - 03
2
1
3
1.05.02 Centering the needle in the needle hole (in sewing direction)
Requirement
With the zigzag setting at "0" and the needle position set at "middle" the needle must
enter the center of the needle hole as viewed in the direction of sewing.
● Bring the needle bar to b.d.c.
● Adjust the eccentric pin 1 (nut 2 and screw 3) in accordance with the requirement.