16
F
E
D
C
12
34
A
B
Preparations
Inserting the bobbin
Make sure that the needle is fully raised and the
machine is turned off before inserting or removing
the bobbin. Open the bobbin cover by pushing the
release button to the right (A). Remove the cover
(B).
1. Insert the bobbin in the bobbin case with the
thread running in a counterclockwise direction.
2. Pull the thread through the slit (C).
3. With a fi nger held gently on top of the bobbin,
draw the thread at the arrow markings into the
stitch plate thread guide from (C) to (D).
4. Pull the thread at the arrow markings into the
stitch plate thread guide from (D) to (E).
5. To cut off excess thread pull thread back over
the cutting off blade at point (E).
6. Replace the bobbin cover.
IDT™ system (integrated dual feed)
For sewing any fabric precisely, PFAFF® ambition
essential™ sewing machine provides the ideal
solution: the integrated dual feed, IDT™ system. As
on industrial machines, the IDT™ system feeds the
fabric from the top and bottom at the same time.
The fabrics are fed precisely. On light fabrics such
as silk or rayon the dual feed prevents puckering
of the seam. The even feeding action also ensures
perfect matching of checked and striped fabrics.
The IDT™ system keeps all layers of quilt projects
aligned to prevent shifting of the layers.
Engaging the IDT™ system
Important: For all work with the IDT™ system, use
presser feet with the center back cut-out (F).
Raise the presser foot. Press the IDT™ system down
until it engages.
Disengaging the IDT™ system
Raise the presser foot. Hold the IDT™ system with
two fi ngers at the ribbed ankle. Pull the IDT™
system down, then pull it away from you to release
the IDT™ system slowly upward.
To Next Page
Loading...
Need help?
General
