Pfaff creative 1475CD User Manual

Top
and bottom
needle position:
When the machine
stops, the
needle
goes
up.
Press
key 15 for
the
needle
down
position.
Function
indicator A
then
lights
up
and
the needle will
remain down
when sewing
is
stopped.
Press key
15
again. The indicator
light
goes
out and the
needle
rises and
stays
at the top
position.
Tie-oft/buttonhole.
To sew:
Press key
19:
Indicator C lights
up, the pro
grammed seam
is
tied off at the
begin
ning, then
indicator
light
C goes out.
If
you
push the key
during
sewing, the
light
goes on
and
a
seam is tied
off
immediately,
whereas
a pattern
is tied
off at the
end, The
indicator
light then
goes
out.
Buttonhole:
In
buttonhole
programs
150, 151 and
152, key 19 is
used
for
determining
and memorizing
the
length. For
more details
please see
pages
90—109.
Reverse
sewing:
Press key
18 before
you start
sewing.
Indicator
light
D
lights
up and the
machine
sews back
wards permanently.
If you press
the
key during
sewing, the
light
will
not
go
on and
the machine will
sew back
wards
as
long
as
the
key is pressed.
Darning:
The
lengths of darning
pro
grams
158 and 159
are
also deter
mined
and memorized
with
key
18.
Electronic
bobbin thread
monitoring:
Bobbin
thread monitor
14 flashes
before
bobbin thread
runs out.
It
goes
out
again
when the full
bobbin
is
inserted
and sewing
is continued.
Important:
cover
33
must always
be
closed.
Electronic
top-speed
selection:
Press
key 16 for slow
sewing. Function
in
dicator
B
lights
up.
The
machine
sews
at
half speed. Press
key 16 again.
The display goes
out and the
machine
sews again
at
full
speed.
32

Pfaff creative 1475CD Specifications

General

Brand	Pfaff
Model	creative 1475CD
Category	Sewing Machine
Language	English