Sewing
Personal stitches
Save personal stitch
1. Save your personal stitches in your machine
by pressing the save button. This will open
the save personal stitch or sequence menu.
Select the personal stitch option with the arrow
buttons on the wheel and conÀ rm by pressing
OK.
2. Select an empty memory by using the arrow
buttons. ConÀ rm your selection by pressing
OK. If the selected memory is not empty, a
pop-up message will appear asking if you wish
to overwrite the previously saved stitch with
the new one. Select yes or no with the arrow
buttons and press OK.
3. Press the save button again to return to sewing
mode.
Note: Some special stitches, such as buttonholes, cannot
be saved. A pop-up will inform you of this when you try
to save such a stitch.
Load personal stitch
1. Load your personal stitches by pressing the
load button. This will open the load personal
stitch or sequence menu. Select the personal
stitch option in the pop-up with the arrow
buttons on the wheel. ConÀ rm by pressing OK.
2. Use the arrow buttons to select the stitch you
want to use and press OK. The stitch will
appear in sewing mode ready to be sewn out.
The number of the loaded stitch will be shown
preÀ xed by a heart.
Delete personal stitch
1. Delete your personal stitches from your
machine when you are in load or save mode.
2. Select the stitch you want to delete and press
the clear button. A pop-up will appear asking
you to verify the deletion. Select yes or no with
the arrow buttons on the wheel and press OK.
3:5
To Next Page
Loading...
Need help?
General
