Pfaff creative sensation pro II - Page 145

9:15
Embroidery mode - stitch-out
&KDQJHWR&XWZRUN1HHGOH
Some cutwork designs can be stitched out using
the INSPIRA
™
Cutwork Needle. These designs
are marked with a cutwork needle symbol in the
creative sensation
™
pro II Embroidery Collection.
When the machine stops and this pop-up message
is shown, insert the corresponding cutwork needle.
Touch OK and press the Start/Stop button to
resume.
Note: These cutwork designs can also be stitched out
without the cutwork needles, but will then have to be cut
manually.
Machine needs to rest
If the machine stops and this pop-up appears on
the screen, the machine needs to rest. When the OK
icon is enabled you can resume embroidery. The
embroidery results will not be affected.