Pfaff hobbylock 4752 User Manual

15
Turn the handwheel towards you (counter-
clockwise), until the looper is on the extreme
right. Feed the looper threading aid through
the eye of the guide (10) for the lower
looper. Then hook the thread end into the
looper threading aid and pull the latter with
the thread through the eye of the guide (10).
Guide the thread through from the right bet-
ween the tension discs and pull the thread
tight from both sides.
Feed the thread into the guide (5) for the
lower looper thread.
Remove the thread from the looper thread-
ing aid and using the tweezers pull on the
free thread end until at least 10 cm (4”) is
showing beyond the eye of the lower looper.
Lay the thread to the left under the presser
foot. Close the swivel plate and the looper
cover.
Feed the thread into the guide (6) for the lo-
wer looper thread.
Guide the thread into the take-up lever (7) of
the lower looper thread.
Feed the thread into the guide (8) for the
lower looper thread.
Feed the thread into the guide (9) for the
lower looper thread.
lower looper
looper threading
aid
looper threading
aid
thread
guide (10)
for the lower
looper thread
guide (9) for
the lower
looper thread
guide (6) for the
lower looper thread
guide (8) for the lower
looper thread
take-up lever (7) of the
lower looper thread
looper
threading
aid
tweezers
guide (5) for
the lower
looper thread
thread tensioner of
the lower looper
thread

Pfaff hobbylock 4752 Specifications

General

Brand	Pfaff
Model	hobbylock 4752
Category	Sewing Machine
Language	English