Pfaff hobbylock 4752 User Manual

25
Setting the stitch width latch
(for standard overlock seams or rolled
hems)
Switch the main switch to OFF.
– Open the looper cover and the swivel
plate.
– Disengage the upper blade (see Page 24).
– Press the stitch width setting knob
towards the right and push the bed slide
of the stitch width latch to the setting
mark S (standard) or R (rolled hem). Then
release the setting knob again slowly.
– Move the upper blade to its upper posi-
tion.
– Close the looper cover and the swivel
plate.
stitch width
latch
setting
marks
setting
knob
stitch
width
latch
stan-
dard
seams
bed slide
rolled
hems
stitch
width
latch
bed slide
Set the bed slide for the stitch width latch to
position S. The stitch width latch will be
pushed forward. This setting allows you to
sew all types of standard overlock seams.
Set the bed slide for the stitch width latch to
position R. The stitch width latch will be
pushed backward. This setting allows you to
sew all types of rolled hems.

Pfaff hobbylock 4752 Specifications

General

Brand	Pfaff
Model	hobbylock 4752
Category	Sewing Machine
Language	English