Pfaff hobbylock 4752 - Threading the Lower Looper (Yellow)

14
Guide the thread from the rear through the
right thread guide (1).
Guide the thread through both the right
holes on the thread guide plate (2), as shown
in the illustration.
Guide the thread from the left to the right
into the right guide (3).
Threading the lower looper (yellow)
Open the looper cover and the swivel plate.
Place the spool on the second spool pin. The
guide points for the lower looper thread are
marked in yellow. Two threading diagrams
are located behind the looper cover to help
you with the threading.
guide plate (2)
guide (3) for
the lower
looper
thread
thread guide (1)