28
3. Flip the fabric over so the bottom side is
now on the top. Pull the fabric around so
it is positioned under the presser foot and
in front of the needles. Make sure the
fabric is not positioned in the path of the
upper blade.
5. Lower the presser foot, sew approx. 2.5
cm (1”) over the seam and pull the fabric
away to the side at an angle, sewing off
the fabric.
Stitching the end of the seam
1. Sew 2-3 stitches off the end of your fa-
bric.
2. Turn the needles to their highest position
and raise the presser foot.
To Next Page
Loading...
