Pfaff performance 5.0 - Idt

2:8
Preparations
B
C
A
1
3
2
4
,QVHUWLQJWKHEREELQ
1. Remove the bobbin cover by sliding it towards
you.
2. Place the bobbin in the bobbin case with the
logotype facing up and the thread unreeling
from the left of the bobbin. The bobbin will then
rotate counter-clockwise when you pull out the
thread.
 3ODFH\RXUÀQJHURQWKHEREELQWRNHHSLWIURP
WXUQLQJDV\RXSXOOWKHWKUHDGÀUPO\WRWKH
right and then to the left into the tension spring
(A) until it “clicks” into place.
4. Continue threading around (B) and to the right
of the thread cutter (C). Replace the cover. Pull
the thread to the left to cut.
IDT
™
V\VWHP,QWHJUDWHG'XDO)HHG
For sewing any fabric precisely the PFAFF
®
performance
™
5.0 sewing machine provides the
ideal solution: the integrated dual feed, IDT
™
system. As on industrial machines, the IDT
™
system
feeds the fabric from the top and bottom at the
same time. The material is fed precisely, eliminating
puckering on seams in light weight fabrics such
as silk and rayon. The dual feed action of the IDT
™
system prevents layers from shifting while sewing,
keeping quilt layers aligned and ensuring a more
perfect match when sewing plaid or striped fabrics.
(QJDJLQJWKHIDT
™
V\VWHP
Important: For all work with the IDT
™
system use presser
feet with the center back cut-out (A).
Raise the presser foot. Press the IDT
™
system down
until it engages.
'LVHQJDJLQJWKHIDT
™
V\VWHP
Raise the presser foot. Hold the IDT
™
system with
WZRÀQJHUVDWWKHULEEHGDQNOH3XOOWKHIDT
™
system
down, then pull it away from you to release the
IDT
™
system slowly upward.
A