14
A
B
C
Oper at e your Pfaff select
Winding the bobbin from the
second spool pin
Push the second spool pin (8) into its hole.
Sl i d e o n a sp o o l cap an d p l ac e t h e t h r ead
sp ool on t he sp ool p i n.
Threading
Place the thread into guide A and pull
it through opening B to the right under
hook C. Wind the thread clockwise a few
times around the bobbin.
Winding
Sw itch on the main switch (1). Hold the
end of t h r ead À rmly and press the the
foot control. The winding action will stop
automat i cal l y as soon as the bobbi n i s f ul l .
Cut the thread, push the bobbin to the left
and r emov e i t .
Don’t forget:
Turn the handwheel release disk (3)
back again. Then turn the handw heel (4)
towards you until it snaps into place.
TIP: If the machine is already threaded, you
can easily wind thread from the second spool
pin without having to unthread the machine.
To Next Page
Loading...
