Pfaff Sewing Machine - Free Motion Sewing Techniques; Darning Foot Installation; Free Motion Position Setup; Sewing on Buttons

35
D
C
G
F
E
A
B
4.2
G - - 2-3 6
3.2
G - - 2-3
2.2
G - - – 2-3
Utility stitches and practical sewing
Free Motion Sewing
Insert the darning foot:
LoosenscrewD.Settheneedleatits
highest point and push the pin of the
darning foot fully into the hole C of the
sewing foot holder. When doing this,
theguideforkGshouldpositionitself
aroundthepresserbar.TheleverEmust
bebehindthexingscrewF.Nowtighten
screwD.
Free Motion Position:
Lowerthepresserfootlifter(A)while
pushing it lightly to the rear. This snaps
thepresserfootlifterintoanotch(B)on
the back side of the sewing machine into
the free motion position.
• Dropthefeeddog.
• Selectastraightstitchorazigzag
stitch.
• Keepanevenspeed,manuallymove
your fabric.
Tip: For even stitches, move your fabric at
a smooth even ow. Move the fabric so the
stitching does not cross.
Sewing on buttons
WithzigzagstitchG(stitchwidth4
mm)youcansewontwoandfourhole
buttons.
• Removethesewingfootandlowerthe
feed dog.
• Turnthehandwheeltowardsyouand
movethebuttonsothattheneedle
enters the left hole in the button.
• Nowlowerthepresserfootlifter;this
holds the button in place.
Stitch
optio-
nal