Pfaff Sewing Machine - Bobbin Winding

15
C
Operate your sewing machine
Winding through the needle
Evenifthemachinehasbeencompletely
threaded, you can still wind the bobbin.
Firstmakesuretostoptheneedlefrom
movingwhilewindingthebobbin(see
page12).
Threading
Raisethepresserfootlifter(15).Passthe
needle thread through the presser foot
and then upwards through the right
threadingslot(12).
Now, pull the thread into the take-up
leverfromlefttoright(10).Thetake-up
levermustbepositionedatitsverytop.
Pass the thread to the right under the
hookC.Thenwindthethreadseveral
times around the bobbin.
Winding
Switchonthemainswitch(1)andpress
the foot control. The winding action will
stop automatically as soon as the bobbin
is full. Cut the thread, push the bobbin to
theleftandremoveit.
Don’t forget:
Turnthehandwheelreleasedisk(3)
backagain.Thenturnthehandwheel(4)
towards you until it snaps into place.