Pfisterer CONNEX - Page 15

PFISTERER CONNEX cable connector Size 3 and 3/S Assembly accessories 15
6.2 Recommended tools and accessories
Name Article No. Description
Punched strip 827 166 001 To hook in assembly lever.
Assembly lever 827 167 001 To press in or pull off the
size 3 CONNEX cable connector.
Assembly bushing 827 174 004 To preassemble CONNEX
cable connectors (e.g. in the
shop).
Protective cap 827 134 003 To protect the pulled off
CONNEX cable connector
against damage and
contamination (not voltage-
proof).
Blind cap 827 133 001 Protection against touching
live CONNEX cable connector.
Transport case 305 798 001 To accommodate the tools.
In addition for flexible cables:
See PFISTERER catalog “4 Cable fittings for medium and high-
voltage networks“ for recommended tools and accessories for the
round-pressing of Al-sleeves.