8 Safety PFISTERER CONNEX cable connector Size 3 and 3/S
2.4 Operator's responsibility
These installation instructions must be stored in the immediate vicinity of the product and
accessible to persons working with the product at any time.
The product may only be operated in a technically flawless and operationally safe con-
dition.
The directions of the installation instructions must be followed completely and without
restrictions.
Apart from the safety notes and directions specified in these installation instructions,
the applicable local accident prevention regulations and general safety rules as well as the
applicable environmental protection regulations must be observed and complied with.
The operator and his authorized personnel are responsible for the trouble-free operation
of the product as well as for clear determinations regarding the responsibility for instal-
lation and repair of the product.
2.5 Requirements on the personnel
Only professional personnel authorized and trained by the manufacturer may work on and
with the product. The manufacturer will issue a training certificate to the personnel. The
certificate is valid for 3 years.
The personnel must have received instructions on occurring dangers.
Professional personnel is anyone able to judge the work assigned to him and recognize
possible dangers because of this professional training, know-how, experience and know-
ledge of the relevant regulations.
The responsibilities for work on and with the product (installation, repair) must be clearly
defined and observed to prevent ambiguous assignment of competencies for the sake of
safety.
Only those persons may work on and with the product that can be expected that they
will perform their activities in a reliable manner. Any manner of work compromising the
safety of persons, the environment or product must be refrained from.
Persons under the influence of drugs, alcohol or medication affecting reaction time must
never work on or with the product.
The regulations regarding age and occupation applicable at the product location must be
observed when selecting the personnel.
The personnel is obligated to immediately report product changes affecting safety to the
operator.
To Next Page
Loading...