Mixing pump RITMO L / RITMO M Overview - Operation
Preparing the machine
2016-02-17
31
Basic information
WARNING!
Danger of injury due to incorrect operation!
Improper operation may lead to serious damage to
persons or property.
Therefore:
Carry out all operating steps according to the
instructions in this user manual.
Prior to starting your work, ensure that all covers
and protection devices are installed and work as
intended.
Never deactivate protection devices during
operation.
Ensure order and cleanliness in the work area!
Loose components and tools on top of one
another or lying about pose potential accident
risks.
Increased noise level may cause permanent
hearing deficiencies. At close range of the
machine 78 dB(A) can be exceeded due to
operational conditions. Close range is a distance
of less than 5 metres to the machine.
25 Preparing the machine
Prior to operating the machine carry out the following steps for
preparing the machine:
Fig. 34: Grille cover
DANGER!
Rotating mixing shaft!
Risk of injury when reaching into the material
container.
During machine preparation and operation the
grille cover (1) must not be removed.
Never reach into the running machine.
Fig. 35: Position
Put up the machine on a stable, even surface and secure against
unwanted movements:
Neither tilt nor roll off the machine.
Put up the machine in such a way that it cannot be hit by falling
objects.
The operating elements have to be freely accessible.
Maintain a clearance of approx. 1.5 metres around the
machine.
1
To Next Page
Loading...
