EasyManua.ls Logo

PG Drives Technology I-DRIVE i36-45 - 2 Trip Types And Possible Causes

Default Icon
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
I-DRIVE TECHNICAL MANUAL – DIAGNOSTICS PG DRIVES TECHNOLOGY
2 Trip Types And Possible Causes
Once the trip type has been established, refer to the relevant section below for further information.
Trip Code Trip Type Description & Reference
0300 - Throttle Trip. Refer to Section 2.7.1
0815 7 Throttle Trip. Refer to Section 2.7.2
0A00 6 Sleep Mode. Refer to Section 2.6.3
0E07 7 Throttle Trip. Refer to Section 2.7.3
1500 9 Short Circuit In Solenoid Brake. Refer to Section 2.9.1
1502 9 Open Circuit In Solenoid Brake. Refer to Section 2.9.2
1600 10 High Battery Voltage. Refer to Section 2.10.1
1601 10 Very High Battery Voltage. Refer to Section 2.10.2
1E08 6* Inhibit 1 Active. Refer to Section 2.6.1
1E09 6* Inhibit 2 Active. Refer to Section 2.6.2
2C00 1 Low Battery Voltage. Refer to Section 2.1.1
2C01 1 Very Low Battery Voltage. Refer to Section 2.1.2
2F01 7* Throttle Displaced At Start-Up. Refer to Section 2.7.4
3B01 2 Motor Open Circuit. Refer to Section 2.2
3D02 3 Motor Shorted To Battery Positive. Refer to Section 2.3.1
3D03 3 Motor Shorted To Battery Negative. Refer to Section 2.3.2
4401 - Record Of Possible Control Fault. Refer to Section 2.8.2
5300 8 Programmable Setting Changed. Refer to Section 2.11
7901 7 Belly Button Active At Start-Up. Refer to Section 2.7.5
All Other Codes 8 Possible Controller Fault. Refer to Section 2.8.1
*Dependant on programming.
Trip Types 4 and 5 are not used for i-Drive.
SK76977-07 88

Table of Contents

Related product manuals