58
Phantom Ultrahigh-speed Camera Manual
Removing a CineMag IV
The Phantom CineMag IV slides into the top compartment
of the camera, as pictured, an the door latches shut.
Ensure the CineMag slides in evenly and mounts securely.
To remove the Phantom CineMag IV, pull the red tab on
the slide door, and pull the CineMag out of the camera.
The CineMag IV is hot-swappable, and the camera can
remain on during this procedure, but ensure the camera
is not writing or reading from the CineMag before
removing it.
Vision Research recommends that you save the clips
from a Phantom CineMag IV as Cine Raw files, even
though it is possible to save them in a number of file
formats. Cine Raw files not only preserve all the metadata
of the clip (such as frame rate, shutter speed, timestamps,
etc.) it will also be the fastest and best-quality format.
Saving from a CineMag IV
Attaching a CineMag IV
To Next Page
Loading...
Need help?
General
