phase II+ SRG-4000 - Precision Test Stand; Mounting SRG-4000 to the Stand

 Machine Accessories  Precision Tools  Cutting Tools  Material Testing Instruments
(201)962-7373
WWW.PHASE2PLUS.COM
Precision Test Stand
Model No. SRG4000-050
Mounting SRG-4000 to the stand:
a) Remove two screws from Leveling plate on
the right side of the unit as shown in Fig 2.
b) Use those two screws to mount the SRG-
4000 to the Mounting Bracket as shown in
Figure 1.
c) Place leveling plate in carry case for future
use without stand.
Figure 2:
Figure 1:
New Swivel adapter shown at right