Machine Accessories Precision Tools Cutting Tools Material Testing Instruments
(201)962-7373
WWW.PHASE2PLUS.COM
Maintenance:
Protection and Storage
To protect the tester when not in use, always remove the probe from the base unit and
store in the supplied plastic case. Also, when not in use, always keep the tester and its
accessories in the carry case.
Cleaning:
To clean the outside of the tester, use a soft, lint free cloth moistened with a mild non-
abrasive liquid or foam cleaner. Periodically inspect the skid surface and stylus for dust,
dirt or other contaminants. To clean the skid surface, use a soft brush moistened with
rubbing alcohol.
Repairs:
Please contact Phase II for instructions.
Do not disassemble the unit or attempt any internal repairs as this will void the
existing warranty.
Accessories for SRG-4000
Part No. Description
SRG4000-050 Precision Support Stand
SRG4000-110 Stylus Extension
SRG4000-130 2μm Stylus (for ultra smooth surfaces)
To Next Page
