System Monitor PSM 2
REV 1A – Software V3 Page 10
6.3 Data Logging
If there is an SIM card inserted into the
PSM2 this function is activatable. With
this function, you can record all the
measurable data and analyse them on
your PC later. A new folder is created for
each measurable parameter. The data is
stored in CSV format and can for better
analyse be read into a spreadsheet.
The period of recording can be adjusted
between 1 minute up to max. 60
minutes. For each device group, it can
be defined if the data should be
recorded.
6.4 Device
In this submenu, all through the PBUS
connected devices get configurated.
Please refer to the appropriate manuals
of the individual PBUS compatible
devices.
6.5 Alert management
For the display of battery -, energy-, main
switch and tank alert the alert notification
can be activated for each monitor. If the
alert notification is turned off, the system
will not show any alarms. If the alert
notification is turned on, it`s possible to
change the device specific (e.g. battery-
or tank) settings.
To Next Page
Loading...