System Monitor PSM 2
REV 1A – Software V3 Page 17
7.3.2 Battery Charger ACE
In the Charger menu, the parameters of the
automatic charger ACE are shown.
By touching the buttons “Limit+”, “Limit-
“and “Sleep”, the corresponding operational
modes can be adjusted.
7.4 Submenu main switch
Needed interface/component: FBC 265 / TSC / EM-box
This menu shows the position of the main
switches.
Main Switches can be switched on or off by
touching the corresponding button. If a PIN
is required for actuation, this will be
indicated by a small padlock in the switch
symbol.
To Next Page
Loading...