System Monitor PSM 2
REV 1A – Software V3 Page 2
1 Safety references 3
1.1 Exclusion of liability 3
1.2 Warranty 3
1.3 CE Conformity 4
2 Content 4
3 Technical data 4
4. Installation 4
4.1 Necessary equipment 4
4.2 Installation and connection of the PSM2 5
4.3 System arrangement PBUS 5
5 Quick operation Start-Up of the PSM2 6
5.1 Password protection (PIN) of the Setup menu 6
5.2 Identification of all devices connected to the PBUS 7
5.3 Adjustment of the operational parameters 7
6 PSM Setup 7
6.1 Setup „Display “ 8
6.2 P-BUS Network 9
6.3 Data Logging 10
6.4 Device 10
6.5 Alert management 10
6.5 System time 11
6.7 Consumer (digital switch) 11
7. Operation 13
7.0 Alarm display 13
7.1 Submenu battery 14
7.2 Submenu Tank 15
7.2.1 Features of Tanks 15
7.2.2 Power save Mode CMT2 15
7.2.3 Troubleshooting tank sensors 16
7.3 Submenu Energy 16
7.3.1 Features Energy 16
7.3.2 Battery Charger ACE 17
7.4 Submenu main switch 17
7.5 Submenu AC (LAU) 18
7.6 Submenu AC (combi inverters) 18
7.7 Temperature 19
7.8 Consumer 19
8. Software Update 20
To Next Page
Loading...