To Next PageTo Next Page
Need help?Do you have a question about the PHILIPS Respironics BiPAP A40 and is the answer not in the manual?
General| Brand | PHILIPS Respironics |
|---|---|
| Model | BiPAP A40 |
| Ramp | Yes |
| Humidification | Integrated heated humidifier |
| Display | Color LCD |
| Data Storage | SD card |
| Voltage | 100 - 240 VAC, 50/60 Hz |
| Power Source | AC power |
| Device Type | Bi-Level PAP |
| Therapy Modes | CPAP |
| Pressure Range | 4-40 cm H2O |
| Ramp Time | 0-45 minutes |
| Connectivity | Bluetooth |
| Operating Sound Level | 26 dBA |
Procedure for detaching the battery module or humidifier from the therapy device.
Defines initial settings for IPAP, EPAP, BPM, Rise time, and Ti based on patient conditions.
Describes how AVAPS rate setting depends on patient needs and clinical condition.
Table to set inspiratory time for controlled breaths based on breath rate and I/E ratio.
Table to set target tidal volume based on ideal weight and target volume per kg.
Overview of the device display screen and button functions for navigation.
Steps to connect power, switch on the device, and initiate therapy.
Instructions on stopping therapy, including standby and power off options.
Procedure to unlock the device to access setup or options.
Explanation of ventilation modes, pressure bar graph, and monitored values on the main screen.
Guide to interpreting various symbols and icons displayed on the device screen.
Details of configurable settings and alarms available in the device's menu.
Configuration options for tubing, alarms, and low minute ventilation.
Specific settings and ranges for the AVAPS-AE ventilation mode.
Explanation of available options parameters like menu access, language, and screen saver.
