EasyManuals Logo

PHILIPS Respironics DreamWear User Manual

PHILIPS Respironics DreamWear
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DreamWear patient tting guide
Follow the instructions to get started tting your full face, nasal or gel pillows mask
To adjust the mask, peel the headgear tabs away from the fabric.
Adjust the length of the top straps. Press the tabs back against
the fabric to reattach. Repeat this step with the bottom straps.
Note: Do not overtighten the headgear.
Position the frame on the top of the head. Pull the headgear
over the back of the head.
Attach the magnetic headgear clips to the mask cushion.
Position the mask until it ts comfortably. When nished, the
elbow should rest at the top of the head.
The cushion opening will be directly under the nostrils. The
cushion will hug the nose and mouth, and leak will be minimal.
With the mask assembled, place the cushion under the nose.
Note: Please read the Instructions for use for further tting information.
Note: At no time should the nose be inside of the cushion opening. If any part of the cushion overlaps the
nose, the cushion is being worn incorrectly. A dierent size cushion may be needed.
Full face
Using the full face sizing gauge, hold horizontally under the nose and select the cushion size based on where the outer edge of your nostrils and
tip of your nose contact the gauge.
Note: Four cushion sizes (small, medium, large, medium-wide) are available.
To adjust the mask, peel the headgear
tabs away from the fabric. Adjust the
length of the straps. Press the tabs
back against the fabric to reattach.
Note: Do not overtighten the headgear.
Position the frame on the top of the
head. Pull the headgear over the back
of the head.
Position the mask until it ts comfortably.
When nished, the elbow should rest at
the top of the head.
The cushion opening will be directly under
the nostrils. The cushion will hug the nose
and leak will be minimal.
Note: At no time should the nose be inside the cushion opening. If any part
of the cushion overlaps the nose, the cushion is being worn incorrectly.
With the mask assembled, place the
cushion under the nose.
Note: Please read the Instructions for Use for further tting information.
Nasal
Using the nasal cushion sizing gauge (included with the mask),
hold it horizontally under the nose. Select the cushion size
based on where the outer edge of the nostrils and tip of the
nose contact the gauge.
Note: Four cushion sizes (small, medium, large, medium-wide) are available.
Gel pillows
Using the gel pillows sizing gauge, place the pillows cushion tips
into the nostrils. Choose the cushion size that allows the blue gel
bases to sit comfortably under the nose without any gaps.
Note: Three cushion sizes (small, medium, large) are available.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PHILIPS Respironics DreamWear and is the answer not in the manual?

PHILIPS Respironics DreamWear Specifications

General IconGeneral
TypeCPAP Mask
MaterialSilicone
Headgear TypeAdjustable
Mask DesignNasal
Frame MaterialSilicone
Headgear MaterialFabric
Size OptionsSmall, Medium, Large
CompatibilityCompatible with most CPAP machines
VentilationExhalation ports
WeightLightweight
FeaturesUnder-the-nose design, open field of vision

Related product manuals