PHILIPS Respironics DreamWear Full face User Manual

Achieving the Right Fit
Cushion Sizing
Four cushion sizes (S, M, L, MW)
are available. Place the cushion
sizing gauge under your nose
(as shown).
Tip: For the best
performance, use the
smallest cushion that ts
your nose.
1. Hold the gauge horizontally
under your nose and select
the cushion size based on
where the outer edge of your
nostrils and tip of your nose
contact the gauge. A mirror
or another person may assist
with sizing.
2. The cushion opening will be directly under your nostrils. The
cushion will hug your nose and mouth, and leak will be minimal.
3. At no time should your nose be inside of the cushion opening. If
any part of the cushion overlaps your nose, the cushion is being
worn incorrectly. A dierent size cushion may be needed.
Contact your healthcare provider for additional information.
Philips Respironics DreamStation Mask Type and System One
Resistance Control Settings
Using your mask with a Philips Respironics DreamStation or System
One device provides optimal comfort. The provider sets this value (X1)
on your device.

PHILIPS Respironics DreamWear Full face Specifications

General

Type	Full Face Mask
Frame Material	Silicone
Sizes Available	Small, Medium, Large
Brand	PHILIPS Respironics
Model	DreamWear Full Face
Material	Silicone
Cushion Design	Under-the-nose cushion
Compatibility	Compatible with most CPAP machines
Features	Top-of-head hose connection, minimal contact design

Summary

Cushion Sizing

Cushion Sizing Guide

Instructions for using the gauge to select the smallest cushion size that fits your nose comfortably.

Philips Respironics DreamStation Settings

Resistance Control Settings

Information on the provider-set resistance control value (X1) for optimal comfort with DreamStation/System One devices.

Mask Frame Sizing

Mask Frame Fitting Tips

Guidance on choosing between Medium, Small, and Large frames and how to adjust for proper fit.